发光二极管,led发光二极管,红外发光二极管,贴片发光二极管,发光二极管生产厂家欢迎您!

3216接收头_贴片接收头_红外接收头_红外接收头参

作者:admin    来源:[db:文章来源]    发布时间:2020-03-15 15:36    浏览量:

   贴片红外接收头正贴反贴都可以,本接收头可以匹配市场上所有的红外发射管,或者我司直插发射管 贴片发射管,大功率发射管!详细资料请咨询我司销售工程师。咨询电话:400 676 8616

3216接收头_贴片接收头_红外接收头_红外接收头参数

3216接收头_贴片接收头_红外接收头_红外接收头参数

Notes: 1.All dimensions are in millimeters

2.Tolerances unless dimensions ±0.1mm

 

Absolute Maximum Ratings (Ta=25℃)

Parameter Symbol Rating Units

Collector-Emitter Voltage VCEO 30 V

Emitter-Collector-Voltage VECO 5 V

Collector Current IC 20 mA

Operating Temperature Topr -25 ~ +85 ℃

Storage Temperature Tstg -40 ~ +85 ℃

Soldering Temperature *1 Tsol 260 ℃

Power Dissipation at(or below)

25℃Free Air Temperature

Pc 75 mW

Notes: *1:Soldering time≦5 seconds.

Precautions For Use

1. Over-current-proof

Customer must apply resistors for protection , otherwise slight voltage shift will cause big

current change ( Burn out will happen ).

2. Storage

2.1 Do not open moisture proof bag before the products are ready to use.

2.2 Before opening the package, the LEDs should be kept at 30℃ or less and 90%RH or less.

2.3 The LEDs should be used within a year.

2.4 After opening the package, the LEDs should be kept at 30℃ or less and 70%RH or less.

2.5 The LEDs should be used within 168 hours (7 days) after opening the package.

2.6 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the

storage time, baking treatment should be performed using the following conditions.

Baking treatment : 60±5℃ for 24 hours.

3. Soldering Condition


相关新闻推荐

在线客服 :

服务热线:400-676-8616

电子邮箱: dg@togialed.com

公司地址:东莞市塘厦镇新头工业区96号

台湾统佳光电科技股份有限公司为统佳光电营运总部,公司具有N多个10年以上的跨国运营经验,公司业务涵盖光电行业的制造业务与服务业务两大领域。是...

Copyright ©台湾统佳光电科技股份有限公司 版权所有 XML地图 | TXT地图